• Persoonlijke service
  • Available from stock
  • Always neatly packaged
  • Quality
Login
Account

You are currently not logged in yet.

Login
Press fittings are a joining system for multilayer pipes suitable for use in hot and cold water distribution systems, for sanitary or heating / cooling purposes. The mechanical coupling between pipe and joint takes place thanks to pressing using manual or electromechanical pliers, which permanently shape the fitting around the pipe in a few seconds. The hydraulic seal between the pipe and the fitting is instead guaranteed by the O-Ring seals inside the fittings. If the pipe is pressed with an electromechanical clamp, the fittings all have a constant and uniform seal, each joint is made in a few seconds and with minimal effort.

Further advantages of this system are safety on site, because all assembly does not require flammable or chemical substances as in other solutions, and the speed of execution: the joints are in fact immediately stable, so as soon as the last joint is made, the system is immediately ready for testing without any waiting time.

ALUPEX universal series

The universel series is compatible with a large number of different profiles (F, TH, U, H, B) and is rich in details that improve performance and facilitate installation.
The fittings are built according to the Leak before press principle: if the fitting has not been pinched then it loses water, this feature allows you to immediately identify any sections that are not pinched during testing with the system pressurized.
The plastic end-of-stroke rings of the tube are also equipped with inspection windows that allow you to see if the tube has been fully inserted and is “in contact” before proceeding with the clamping.

Main advantages of the ALUPEX press series

  • Fittings compatible with different shaping profiles (F, TH, U, H, B)
  • Control windows for the stop pipe
  • Immediate and uniform sealing of the joints thanks to the use of pliers
  • Speed ​​of implementation and immediate testing of the system
  • Safety on the construction site
  • Low cost of fittings


Display:


Loading...

Press plastic box, suited only for alupex tubes 16mm. Including a brace and press clutch of 16mm. The front side is equipped with a 1/2" female thread.

€ 18,00

In stock
2 business days
keyboard_arrow_up keyboard_arrow_down
icons/icon-basket Limited in stock

Press integrated junction for sanitary connections SINGLE (green) 1/2 - suited only for alupex pipes 16mm Including a brace and press clutch of 16mm. The front is equipped with a 1/2" female thread.

€ 9,50

In stock
2 business days
keyboard_arrow_up keyboard_arrow_down
icons/icon-basket Limited in stock

A blue plastic 16mm plug to seal pipes up to 10 bar pressure.

€ 2,00

In stock
1-2 business days
keyboard_arrow_up keyboard_arrow_down
icons/icon-basket Limited in stock

Een rode plastieken stop 26mm om leidingen af te dichten tot 10 bar druk.

€ 2,00

In stock
1-2 business days
keyboard_arrow_up keyboard_arrow_down
icons/icon-basket Limited in stock

Een blauwe plastieken stop 32mm om leidingen af te dichten tot 10 bar druk.

€ 2,50

In stock
1-2 business days
keyboard_arrow_up keyboard_arrow_down
icons/icon-basket Limited in stock

Een rode plastieken stop 26mm om leidingen af te dichten tot 10 bar druk.

€ 2,50

In stock
1-2 business days
keyboard_arrow_up keyboard_arrow_down
icons/icon-basket Limited in stock