Description
Multi-position boiler. Boiler for installation on the floor or vertically against the wall.
Introduction
- High-quality insulation made of polyurethane foam.
- Polypropylene housing.
- Optional kit with pre-wired control thermostat.
- Suspension brackets in option.
- Safety group 7 bar Ø 3/4" included.
- Anti-legionella: storage temperature > 60°C.
- Thermostatic mixer tap recommended.
- Sanitary circulation pipe with placement of a T-piece on cold water supply and non-return valve.
PROPERTIES
- Capacity: 130 l
- Floor/standing model: yes
- Wall model: yes
- Buffer: steel
- Placement: vertical/horizontal
- Class: C
- Height: 1005 mm
- Diameter: 525 mm
- Central heating connection: 1"
- Sanitary ware connection: 3/4"
Cross-section
- Supply of domestic cold water
- Domestic hot water outlet
- Manual air vent
- Supply primary circuit
- Return primary circuit
- 30 mm injected polyurethane foam
- Sheet steel outer tank
- Stainless steel inner tank
- Cover in polypropylene
- Polypropylene shockproof housing
- Polypropylene base
- Stainless steel sensor sleeve (50 cm)
Domestic hot water performance
- Peak flow at 40°C = 23.6l/min for 10 minutes
- Peak flow 1st hour at 40°C = 13.06l/min for 60 minutes
- Peak flow at 45°C = 20.2l/min
- Peak flow 1st hour at 45°C = 11.2l/min
