Description
A high-quality floor heating manifold (set) for 13 circuits of underfloor heating.
Information
- Flow regulators: 0-5 l/min (Type Tacconova / Switzerland)
- Return valves M30 x 1.5 mm for area motor units
- Pipe connection 3/4 EK for clamp couplings 3/4 EK
- Nickel-plated filling and drain valve
- End cap 1".
- Manual air vent (if there is too little pressure, no air can enter. We recommend placing an air separator on the boiler inlet)
- Suspension bracket (set)
- 1 set of identification labels
- 2x flat seal
- Stainless steel manifold
- Made in Germany
*Standard picture for the full range. Number of connections may vary
