RTL box wit voor vloerverwarming

Description

You can use this RTL box for a renovation. You do not need a separate pump group for 1 cycle (100lm) floor heating.

Connection

• You start at the distributor (radiators) with a floor heating pipe
• You install 100lm of underfloor heating (+- 10m²)
• You connect this 100lm on the left side of the RTL box with a clamp coupling 3/4EK to 16mm
• You start with a heating pipe on the right side of the RTL box
• You connect this pipe to the return of the distributor radiators

Start-up

• The first week you set the control knob to 1
• The first week you set the control knob to 2
• The first week you set the control knob to 3

Functioning

• When the control knob is in position three, the tap only lets water through at a maximum of 30 degrees. 
• If the temperature is too high, the flow will stop.
• Water temperature cools down
• Once cooled down enough, the flow is restored.

Remarks

• Ideal for a renovation
• Control knob can be set to maximum 3 or 3.5 to avoid overheating
• Can also be used combined with wall heating