Description
The use of rainwater is done in the simplest way with a self-priming rainwater pump that is installed indoors. Rainwater pumps suck rainwater from the rain citern and pump it to the desired drain points. The GEP inner pumps are available in different capacities. The self-priming rainwater pumps must always be used in combination with a non-return valve in the suction line, preferably with a floating suction type of GEP.
PRODUCT DESCRIPTION
The self-priming centrifugal pump (RC-3/5/8/9) is equipped with an automatic pressure control. The self-priming centrifugal pump is intended for horizontal installation.
The housing of the pump is made of brass and stainless steel. The interior is made of stainless steel and ceramic couplings, specifically for rainwater. The connections of the suction and discharge side are 1 “or 5/4” internal thread. The pump is supplied with a pressure switch for pressure-dependent switching on and off of the pump. The pressure switch is also equipped with a pressure gauge and dry running protection. The RC pump must be installed in a frost-free, dry area with drainage on the ground, for example a scrubbing well.
APPLICATION
The system can be used for filtered rainwater to flush toilets, a washing machine or an outdoor tap. The RC pumps are suitable for continuous use such as sprinkling.
MATERIAL NAME
- Suction, discharge side: brass
- Fans: stainless steel
- Pump housing: stainless steel
- Actuator housing: stainless steel
- Air separator and diffuser: PPO (noryl)
- Electro cable pump: 3-wire 1,00 mm² H07Rn-F
Additional information
Residential indoor pump with automatic on/off switch. The pump can be used to connect 4 toilets, a washing machine and maximally 3 garden taps. The distance the pump can bridge is maximally 8 metres high and 40 metres long. This self-priming centrifugal pump is intended for horizontal installation and is equipped with 5 fans. The pump casing is made of brass and stainless steel. The internal casing is manufactured out of stainless steel and ceramic couplings, specifically for rainwater. The connections of the suction and discharge side are 1” internal thread. The pump is supplied with a pressure switch for pressure-dependent on/off switching of the pump. The pressure switch is also equipped with a pressure gauge and dry running protection.
- Power: 1.100 Watt
- Maximum capacity: 3,6 m³/h
- Maximum pressure: 5,0 bars
