The trident 150/325 tank filter is designed for rainwater filtration. The trident 150/325 rainwater filter is installed in a cistern or rainwater tank between the inlet and the outlet. A rainwater filter based on trident filter technology separates the dirt particles from the rainwater before the clean rainwater is stored in the tank.
A Trident filter consists of a filter surface made of special triangular shaped slats that are perpendicular to the flow direction. These slats are tilted so that the flowing rainwater flows against the raised side of the slat and is deflected into the tank. All dirt that is larger than the openings between the slats (0.5 mm) is left behind on the filter plate and is discharged towards the sewer.
As the dirt particles can block the filter openings over time, it is important to keep the filter clean. A dirty filter will cause less rainwater to flow into the tank and reduce the efficiency of the rainwater system. To ensure that your filter is cleaned in time, the Trident 150/325 tank filter is available with a sprayer including an automatic on/off switch. With the Trident 150/325 filter you are assured of clean rainwater and a high efficiency of your rainwater system.
View all reviews from our customers below
Produkt volledig conform, interactie via chat zeer efficient, en levering internationaal zonder problemen, dank je wel
Snelle levering, scherpe prijs.
Snelle correcte levering aan zeer goede prijs .
Snelle reactie , zeer goede begeleiding van aankoop tot levering .